#etween lead-acid battery charger# lithium battery charger#

The difference between lead-acid battery charger and lithium battery charger

1.The charging control method of lead-acid battery and lithium battery charger is different.

2, lithium battery charging control is to charge in accordance with the constant current, and then when the battery voltage rises to 4.2V, the voltage will no longer rise, the charger detects the current, if the current is less than a certain value, the end of charging. Lithium is sensitive to overcharge, so the protection circuit is complex. For a single nominal 3.6V battery, the maximum charging rated voltage is 4.2V, and the upper limit of allowable error is not more than 1%.

3.The ideal charging current of the lead-acid battery is pulsed, and the pulse charging is best with the 50-60HZ mains power supply that we use for direct rectification and non-filtering pulsating DC charging (this is based on the simple circuit and low cost). Due to the self-discharge rate of the lead-acid battery, when the power frequency charging is used, A constant voltage charging method is generally used (and there will certainly be limited current).

4.The lead-acid battery charger is generally set to a two-stage or three-stage charging mode, and the voltage level of the lithium battery and lead-acid battery is not matched. There are many kinds of lithium batteries, and battery performance and battery protection board parameters may be different. Therefore, lithium batteries do not have universal battery chargers like lead-acid batteries. Generally speaking, lithium batteries are equipped with a special charger when they leave the factory. In order to protect lithium batteries, special chargers are needed.

:2023-07-28
Wechat support KRECO Alipay support KRECO swift payment support KRECO Paypal payment support KRECO