KRECO #IP67 #FoodGradeCables #Washdown #FoodFactory #PowerSupply #SafetyComponent #CorrosionResistant #SiliconeCables #HACCP

Food factories are some of the harshest environments for electronic equipment. Humidity hangs in the air. Floors and walls are washed down multiple times a day with high-pressure water jets and chemical sanitizers. Cleaning agents, oils, and food residues create a corrosive atmosphere that slowly destroys unprotected components. In this setting, a generic power supply is a ticking time bomb.

            
 

The Risk of Using a Generic Power Supply

Standard power supplies are designed for controlled indoor environments. They have ventilation openings, exposed connectors, and ordinary cabling that absorbs moisture and corrodes over time. In a food factory, these weaknesses become failure points. Moisture seeps in, causing short circuits. Corrosive gases attack solder joints and contacts. Within months, the power supply fails — stopping the production line, triggering emergency repairs, and risking contamination of food products.

Our Baseline: IP67 Full Sealing

KRECO's baseline for food factory applications is IP67 full sealing. This means the power supply enclosure is completely dust-tight and protected against immersion in water up to one meter for 30 minutes. No moisture enters. No corrosive gases penetrate. The internal electronics remain dry and operational even under direct hose-down. IP67 is not an upgrade — it is the minimum requirement for survival in a washdown environment.

But That's Not Enough: Food-Grade Silicone Cables

Sealing the enclosure alone is insufficient if the cables degrade. Ordinary PVC cables crack, swell, and become brittle when exposed to oils and cleaning chemicals. That is why KRECO uses food-grade silicone cables. These cables are specially formulated to resist oil, grease, and corrosive agents. They remain flexible and intact even after repeated exposure to harsh sanitizers. Additionally, they meet food industry hygiene standards, eliminating the risk of chemical leaching that could contaminate food products.

In This Environment, the Power Supply Is Not Just a Component — It's a Safety Component

In a food factory, a power supply failure does not just mean downtime. It can mean spoiled product, lost production, and even safety hazards. The power supply sits in the same environment as the food processing equipment. If it leaks contaminants, catches fire, or fails unexpectedly, the consequences extend far beyond a simple replacement. That is why we treat the power supply as a safety component — not a commodity part.

Our Standard: Never Become That One-in-a-Million Failure Point

Our standard is to ensure the power supply never becomes that one-in-a-million failure point on the production line. Every seal is tested. Every cable is verified. Every unit is subjected to IP67 validation before leaving our factory. We engineer for the worst-case scenario because in food production, there is no margin for error. When you install a KRECO power supply in your food factory, you install confidence.

Choose KRECO. Because in a washdown environment, generic is not an option.

:2026-09-23
Wechat support KRECO Alipay support KRECO swift payment support KRECO Paypal payment support KRECO