A Swiss precision measurement instrument company faced a challenge that many high-tech manufacturers know all too well: they needed a power supply with exceptional output voltage accuracy — ±0.1% — for their calibration equipment. Standard industrial power supplies typically offer only ±5% regulation, which is far too loose for instruments that demand exacting reference voltages. The gap between "good enough" and "precise enough" seemed insurmountable.
The Old Solution: Expensive Lab-Grade Linear Power Supplies
For years, the company relied on laboratory-grade linear power supplies. These units delivered the required accuracy, but at a staggering cost — roughly 10 times that of a standard switching power supply. They were bulky, inefficient, and generated significant heat. The company's engineering team knew there had to be a better way, but every alternative they evaluated either sacrificed precision or failed to meet their stringent efficiency targets.
KRECO's Hybrid Approach: Combining the Best of Both Worlds
KRECO's engineers took a fresh look at the problem. Instead of choosing between the high accuracy of linear regulators and the high efficiency of switching converters, they combined them. The result was a hybrid switching-linear power supply topology. A switching stage handles the bulk conversion with 92% efficiency, while a linear post-regulator provides ultra-low noise and tight regulation. A digital trim circuit allows fine adjustment of the output voltage to within ±0.08% — exceeding the customer's original specification of ±0.1%.
The Results: Precision, Efficiency, and Dramatic Cost Reduction
Accuracy: ±0.08% (exceeds the ±0.1% requirement)
Efficiency: 92% (compared to ~40% for pure linear supplies)
Cost Reduction: 60% less than the previous lab-grade solution
These numbers represent more than technical achievements. They translate directly into competitive advantage for the Swiss company: lower bill of materials, smaller enclosure size, reduced cooling requirements, and a faster path to market for their precision instruments.
What the Customer Said
His surprise is understandable. For decades, the conventional wisdom held that switching power supplies were inherently noisy and imprecise — suitable only for applications where cost and size mattered more than accuracy. KRECO's hybrid design shatters that assumption. By intelligently merging two proven topologies, we deliver the precision of a linear supply with the efficiency and affordability of a switcher.
Precision Doesn't Have to Come at a Premium
This case proves a powerful point: precision doesn't have to come at a premium. Too often, engineers default to over-engineered, overpriced solutions because they assume high accuracy requires exotic components or specialized architectures. KRECO demonstrates that thoughtful engineering — combining existing technologies in novel ways — can achieve superior results at a fraction of the cost. Whether your application demands ±0.1% or even tighter, we can design a power supply that meets your needs without breaking your budget.
Choose KRECO. Because precision should be accessible, not exclusive.
