Right Watt, Half Repairs – Why Matching Device Wattage to Power Supply Wattage Is the Biggest Mistake
A client asked me, Billy:
"My device maxes out at 65W. What power supply do I need?"
We recommend a power supply rated at 80W or above, with 90W or 100W being the optimal choice.
Why? Because most people make the same mistake: they match device wattage directly to power supply wattage. A 65W device? They grab a 65W power supply. And then they wonder why equipment keeps failing.

The Physics Behind the Gap
Peak power draw is typically 1.2 times the rated specification. Plus, the power supply itself has conversion losses — typically around 15%. A 65W device actually needs over 80W to stay stable under real-world conditions.
But that is just the average case. Consider these examples:
- A motor's startup current is 3 to 5 times its steady-state draw.
- A printer's heating element doubles power consumption during warm-up.
- Use a 65W supply on a 65W printer, and it trips overcurrent protection the moment it starts.
Three-Step Selection Guide
Getting the wattage right is not complicated. Follow these three steps:
- Step 1: Confirm the device's maximum continuous power draw.
- Step 2: Multiply by 1.2 for peak headroom.
- Step 3: Divide by 0.85 for conversion efficiency. Round up to the nearest standard rating.
Example: 65W device
65 × 1.2 ÷ 0.85 ≈ 91.8W
→ Choose a 90W or 100W power supply
The Result: Half the Repairs
Selecting the right wattage is not about over-engineering. It is about giving your equipment the margin it needs to operate reliably. When you undersize a power supply, every component in the system works harder, runs hotter, and fails sooner. The repair costs, downtime, and customer complaints add up fast.
Pick the right wattage, and you cut equipment repairs in half. That is not an exaggeration. It is engineering reality.
Choose KRECO. We help you select the right power — every time.