It is one of the most frustrating experiences in sourcing. The sample you approved was perfect. Fit, finish, performance — everything checked out. Then the production batch arrives, and nothing matches.
Dimensions drift. Tolerances slip. The product that passed with flying colors now fails basic checks.
Why does this happen? Because between the sample and the production run, something changed. Process parameters shifted. Tooling wore down. Operators took shortcuts. And nobody caught it — until it was too late.

How KRECO Breaks the Cycle
We eliminate this gap with First Article Inspection (FAI).
Here is how it works:
- We measure every critical dimension against the golden sample — the approved reference unit that defines the standard.
- We lock the process parameters — machine settings, temperatures, pressures, speeds — everything that affects the final product.
- No deviation allowed. If the first article does not match the golden sample within tolerance, production stops until the root cause is found and corrected.
The Result
Your production units match your approved sample one hundred percent.
Not close. Not good enough. Identical.
Every unit that rolls off the line is held to the same standard as the one you signed off on. No surprises. No downgrades. No "we'll fix it in the next batch."
Stop accepting downgrades.
Demand FAI.
Choose KRECO. Where what you approve is exactly what you get — every time.